FPL 236 electronic ballast

FOB Reference Price:Get Latest Price
$6.50 - $8.00 / Piece | 1000 Piece/Pieces (Min. Order)
Model Number:
T8 2G11
Lead Time:
Quantity(Pieces) 1 - 1000 >1000
Est. Time(days) 25 Negotiable
$5.00 /Piece | 1 Piece (Min. Order) | Buy Samples
Report Suspicious Activity
Quick Details
Place of Origin:
Brand Name:
Matched Tube:
T5 T8 T9 etc..
Power Factor Compensation:
Electronic Ballasts:
T5 T8 Electronic Ballast
18w 30w 36w 58w etc
2 years
Supply Ability
Supply Ability:
1000000 Piece/Pieces per Month
Packaging & Delivery
Packaging Details
Export standard package.
Ningbo or Shanghai
Lead Time :
Quantity(Pieces) 1 - 1000 >1000
Est. Time(days) 25 To be negotiated

FPL 2X36W electronic ballast

2x18w 218 2x30w 230 2x36w 236 2x58w 258 electronic ballast


T8 Electronic Ballasts 18w 30w 36w 58w T5 electronic ballast



Safety Requirements


Marking                                     IEC/EN 61347-1GB19510.1


Protection against contact with live parts        IEC/EN 61347-1GB19510.1


Terminals                                   IEC/EN 61347-1GB19510.1


Provisions for earthing                        IEC/EN 61347-1GB19510.1


Moisture resistance and insulation              IEC/EN 61347-1GB19510.1


Dielectric strength                            IEC/EN 61347-1GB19510.1


Fault conditions                              IEC/EN 61347-1GB19510.1


Protection of associated components           IEC/EN 61347-2-3GB19510.4


Abnormal conditions                          IEC/EN 61347-2-3GB19510.4


Creepage distances and clearances            IEC/EN 61347-1GB19510.1


Screws,current-carring parts and connections    IEC/EN 61347-1GB19510.1


Resistance to heat, fire and tracking            IEC/EN 61347-1GB19510.1


Resistance to corrosion                       IEC/EN 61347-1GB19510.1


Electromagnetic Compatibility (EMC)


Limits for harmonic current emissions                      IEC/EN 61000-3-2GB17625.1


Limits and methods of measurement of radio          IEC/EN 55015GB17743


disturbance characteristics of electrical lighting


and similar equipment


Equipment for general lighting purpose-EMC       IEC/EN61547GB/T18595


Immunity requirements
Installation and Wiring
Terminals                                                        Push-in type with test contact
Cross section of wires (mm²)(any lead)             0.5~1.0mm2
Max. allowed lamp cable length (m)                  1.5m
Min distance ballast to ballast (cm)                   5cm
Cautions when installing the electronic ballast
Please choose appropriate wires which is with Safety Mark Approval and in the range of dimension stated on the label to connect with the input and out put terminals of the ballast.
Please choose the lamp(s) according to the types
Please correctly connect the wire to the ballast according to the label stated and double confirm the connection is correct before lamp start working.
Norminal Voltage is stated on the label. Please double confirm before usage.
Electronic ballast must be grounded for safety reason.
Must connect the output terminal before the input terminal when endurance test preventing short circuit which cause ballast damaged.
It is forbiden for lamp fixture to share the same cable with the high power equipments during installing which may cause ballast broken because of high surge current.
Please make sure ballast is working under stated environmental conditions especially ambient temperature and tc.max.